• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser 2

Guards your vehicle against key cloning and prevents thieves from driving it with the original keys. Our most recent immobiliser connects to the CAN data network of your vehicle and a unique PIN has to be entered to begin the engine.

Ghost unlike trackers, does not emit radio frequency signals, and therefore cannot be identified by diagnostic tools. ghost immobilise doesn't have LED indicators or buttons to indicate its presence in your van or car.

Anti-key cloning

The Ghost immobiliser was created to stop key cloning. The device is connected to your vehicle's data network CAN and creates an unique pin code by using the factory buttons on your dashboard and steering. This will stop the thief from being able to start your vehicle. If the incorrect PIN code is entered, your car will not be started which makes it impossible for them to escape with your joy and pride.

A ghost immobiliser is a new technology that is extremely hard for thieves to beat. The ghost immobiliser unlike physical deterrents, like wheel locks or steering locks that can be cut, is a discrete electronic device. It isn't recognized by thieves as it does not emit radio signals and is operated in a silent manner.

This next-generation immobiliser will protect your car against a variety of threats, including key-hacking, relay attacks and duplicate copies. It can also stop a thief adding a key or replacing your ECU because it won't permit them to start the vehicle without entering the correct PIN.

The ghost immobiliser 2 unlike other immobilisers, it does not require the use of a remote control or key fob to operate. It is deactivable using an app on the driver's smartphone. This makes it perfect for those times when you have to give your car over for valet parking or servicing without the key fobs.

The autowatch ghost immobiliser cost Ghost-II represents the latest evolution of Ghost immobiliser. It is designed to be simple and easy to use, while still being as secure as is possible. This is achieved by linking the Ghost-II with the vehicle's CAN data network. This means that there are no extra wires that could be concealed or easily found. It has built-in features that allow you to disarm the Ghost-II simply by connecting it to your vehicle's Bluetooth.

OBD port hacking

OBD port hacking is a new technique employed by professional auto thieves to steal vehicles. Thieves have access to your vehicle's OBD by using an laptop, mobile app, and some cables that can be purchased online for less than PS50. Once they have access, they are able to do whatever they want to do, from resetting your vehicle's fault codes to tuning your car, or even taking it away in less than a minute.

If you have a ghost 2 immobiliser reviews immobiliser fitted it can stop your car being stolen using this method by requiring that a unique PIN sequence is entered alongside your key fob in order to start the engine and drive away. It communicates with the vehicle's ECU (Engine Control Unit) by using the CAN Data Circuit. This is completely undetectable by any scanning technology, RF or code grabbing. It has a Service/Valet Mode that allows your vehicle to start with no PIN code.

To utilize an OBD hacking device, you'll require a laptop that has software capable of reading the OBD protocol, which can be bought for less than PS100 on ebay or Amazon. Also, you will require a cable with OBD pins connected to the CAN Bus. These cables can be purchased on Amazon/Ebay around PS50. Then, you need to splice the cable into the wire harness of your vehicle for example, the radio wiring harness.

Once the hacker has established a connection to your vehicle's OBD port, they are able to send diagnostics requests to the system at high baud rates which can cause CAN to crash, and prevent systems within your car from working. This can cause your car's engine to stop or lock up.

No additional remotes or key fobs required.

The car immobiliser is a fantastic piece of anti-theft technology that is utilized by millions of modern vehicles all over the world. Using engine ECU software to stop cars from starting if a false transponder signal is detected by it, an aftermarket immobiliser is a great way to protect your vehicle.

However, it is easy for thieves to bypass an immobiliser system when they have access to the code that allows them to disable it. A thief could easily remove the battery from many key fobs by squeezing them open. They could then employ an instrument to take out the internal circuit board of an immobiliser and replace it with a blank. They will then be in a position to start your car.

With the TASSA approved Ghost 2 immobiliser, there are no additional keys or remotes needed. The immobiliser is directly connected to the vehicle's ECU (Engine Control Unit). This is accomplished via a discrete, quiet data loop in CAN that cannot be detected by diagnostic tools, such as the ones used by high-tech thieves. It also doesn't utilize a traditional key fob with LED indicators, which means it is able to go unnoticed at sight.

There will be times when you need to deactivate Autowatch Ghost 2's automatic security, for example during a valet parking or servicing. The ghost CAN immobiliser comes with a specific mode to do this, referred to 'Service Mode' which can be activated with just the touch of a button on your smartphone. The car is still operated however, the maximum speed is restricted to 36 mph for added security.

Contact us today to arrange an appointment for a demonstration in our workshop. A member of our team will give you a full breakdown of the process and provide you with owner's manuals, installation certificate, Ghost 2 emergency card and security guarantee.

Simple change of PIN code

Ghost is the latest generation of device that protects your car without cutting wires, or installing aftermarket key fobs. It connects directly to the vehicles CAN data network and a personalised PIN code is programmed in it via buttons on your steering wheel and the dash. The system blocks engine start and cannot be re-enabled since no RF signals are generated from the device. This makes it unrecognisable by sophisticated scanning or code grabbing technology that modern thieves employ.

The PIN code can be changed to block previous drivers or even include an override code if you forget the sequence. The installer will demonstrate the process to do this during installation. The system includes a valet mode feature that can be used to temporarily disable pin input sequences so that your garage or mechanic can work on the vehicle without having to know the pin number. This is ideal for those who want to hand over their vehicle for valet parking / service but don't want divulge the PIN sequence.

Unlike Thatcham products that require additional key-fobs in order to operate, Ghost is a discreet system that uses the buttons inside your vehicle to create a unique interchangeable PIN code sequence. This sequence is entered using the smartphone app, meaning there are no additional LEDs displayed and your vehicle is safe from the risk of being blocked by hackers or other technology.

Every vehicle is tested

A ghost immobiliser, in contrast to key fobs which require pressing buttons, is discreetly placed under the dash or steering wheel. You won't even know it's there. The device is connected to the CAN network in your vehicle, and a PIN code can be programmed using buttons on your car. The system won't permit your vehicle to start until this code is entered. This means that thieves can't duplicate the keys on your car or gain access to the OBD port to hack your vehicle.

Ghost can be installed in all vehicles, including electric vehicles, motorhomes, vans, and bikes. It's also extremely versatile and can be set to disable in a variety of situations. For instance, it could be programmed to enter Valet mode when the vehicle is being taken to a valet park or a service provider. This means that your car can be operated within a specified 30mph speed limit and the ghost immobiliser will activate itself once it is returned to your home.

Another fantastic feature is that the device can be reset to the personalized PIN code at any point. This is useful in the event that you forget your code or the device becomes inoperable and is as good as new again.

It's also worth noting that the device is unnoticeable to anyone who isn't familiar with it. It does this by analyzing the buttons on your steering wheel and dashboard, and using the data it sends to determine the button that was pressed. This makes it a safe and reliable security solution that isn't affected by RF scanning, jamming or door lock pick sets.