• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru Key Fob at Home

Depending on how brand new your Subaru is, you may need to have the key fob programmed by an automotive locksmith. This is accomplished through the connection of a computer programming machine to your car.

To program your subaru Keys lost begin by unlocking the driver's door using the door button control then close it. You will hear a chime and see the dome lights blink in the instrument panel.

Step 1: Find the Transmitter Circuit Board

There are many ways to program your key fob. First, you must know which kind of key fob you own. You can determine this by looking at the key fob's shape or by listening to the car's sound.

Once you have the information you require, you can start the process of programming your key fob at home. You'll require an aluminum flathead and a key to do this. You can open the key fob by twisting it. Then, push the metal key into the case and remove the battery from the small tabs which hold it in place. Replace the battery and then put the case back together.

Step 2 Step 2: Unscrew your Key Fob Case

Change the battery is a smart idea as it can revive key fobs which aren't working no longer. In some cases, the buttons on the key fob might be broken. If you notice that the metal contacts of the button are loosened Try soldering them into place again to make them work again.

Make sure you turn off your ignition and close your doors before you begin. You can do this by closing the driver's side door and pressing your door button ten times in quick sequence. Then you'll hear the instrument panel chime and your dome light should flash. This indicates that you are ready to move forward.

Step 3: Insert the fob of the key into the ignition

There are lots of articles on the internet that will show you steps on how to program a new or replacement Subaru key fob at home, but most of them are not particularly specific. Programming an electronic key is best handled by an experienced auto dealer in Fort Bliss or a locksmith.

Sit in the driver's seat with all doors shut and the engine off. Use the door button to open all doors. Open and close the driver's door 2 times. Then, remove the key from the ignition switch (don't turn it) 10 times in 40 seconds. The system will vibrate when the settings are changed.

Step 4: Turn the Ignition On

Before proceeding with this method of key fob programming it is important to remember that this procedure only works with a functioning key already. If not you can find an auto-locksmith or dealer who will need to program the key fob for your lost subaru car keys Fort Bliss.

After your key has been programmed, you should be able start your car in less than five seconds. Begin by closing all doors, then turning off the engine. Then, sit in the driver's chair and unlock all doors with the door button control. Insert the key in the ignition and turn it back to the first position. The electrical systems will be activated however, the engine remains in neutral. Repeat this procedure ten times.

Step 5: Unlock Driver's Door

subaru smart key replacement offers a wide range of high-end cars with key fobs, which can lock and unlock the doors and even start the car and defrost the windows. These gadgets can sometimes stop working.

Find a locksmith or dealer to solve the issue. This will fix the issue and ensure that your vehicle is safe.

To do this, open the driver's doors and close it. Then, you need to place the ignition key and switch it to the initial position. Then, return it to the off position. Do this ten times in one row as fast as you can. After tenth attempt you will hear a sound.

Step 6: Press the Lock/Unlock button on the Driver's Door

If you are looking to replace the battery inside a subaru key fob (homepage), the process is easy. Unlock the exterior fob case. Then make use of an flathead screwdriver, to pry open the inside of the case and take out the old battery.

After removing the battery and replacing it with the new one. Close the case. Sit in the driver's seat and unlock all doors using the door button control. Place the key in ignition and turn it so that the electric system is switched on, but the engine is off. Repeat this 10 times in a row until you hear a chime from the instrument panel. This will turn the system into programming mode.

Step 7: Press on the Passenger Door Lock/Unlock button

For certain owners, the irritating sound that is heard when locking and unlocking the subaru duplicate key key fob from outside the vehicle may become distracting. In some instances, the chirp can be canceled by opening and closing all doors and a double-click of the lock button on the key fob.

Switch the ignition off and shut all doors as well as the lid of the fuel-filler. Press and hold the lock side of the key fob's lock button for 10 seconds. The instrument panel emits a sound when this is done. The chirp signalizes that the lid of the fuel-filler door are locked. It is possible to alter the setting to make the doors are locked automatically without the need to press a switch.

Step 8 Step 8: Enter the 8 Digit Transmitter Number.

Keep the first 8-digits in your mind. Now, get into the driver's seat, close the doors and turn the key to the first position. After 10 turns, your panel will chime once.

The circuit board that controls the transmitter is located in the key fob's case. The circuit board will have one or two numbers with 8 digits. Follow the steps in the guide to register the code. For older models, this procedure may require a visit to the dealer.